The Decorative Stone Effect PU Panel In Stone redefines wall cladding by delivering the visual depth of natural stone at a fraction of the weight, cost, and installation complexity — making it the preferred choice for architects, designers, and homeowners worldwide.
A Decorative Stone Effect PU Panel is a lightweight wall-cladding product manufactured from high-density polyurethane (PU) foam. The material is moulded under precision tooling to reproduce the grain, texture, and colour variation of quarried stone — limestone, slate, sandstone, and stacked-stone veneer being the most popular profiles.
Unlike traditional stone tiles, which can weigh 25–80 kg/m², a PU panel typically weighs less than 6 kg/m², making it safe for partition walls, timber-frame structures, and even ceilings. The panels used in the H-Series range from Haining Bingochic Decoration Material Co., Ltd. are manufactured in Zhejiang Province, China, and exported to construction markets across Europe, North America, Australia, and Southeast Asia.
High-density polyurethane foam offers a unique combination of properties that natural stone cannot match: closed-cell structure for moisture resistance, inherent dimensional stability, excellent adhesion to standard construction adhesives, and the ability to accept pigments uniformly throughout the substrate — not just on the surface — which prevents colour fade when panels are cut or chipped.
The H-Series is one of the most architecturally versatile product lines offered by Bingochic. The five models — H001-1 through H005-1 — cover large-format panels suitable for bold feature walls as well as square tiles that suit mosaic-style layouts. The table below summarises the key technical data.
| Model | Dimensions (mm) | Panel Area (m²) | Approx. Weight | Best Application |
|---|---|---|---|---|
| H001-1 | 1200 × 600 × 50 | 0.72 m² | ~4.3 kg | Feature walls, hotel lobbies |
| H002-1 | 1200 × 600 × 50 | 0.72 m² | ~4.3 kg | Commercial facades, reception areas |
| H003-1 | 600 × 600 × 50 | 0.36 m² | ~2.2 kg | Accent walls, kitchen splashbacks |
| H004-1 | 1200 × 600 × 50 | 0.72 m² | ~4.3 kg | Retail display, restaurant interiors |
| H005-1 | 1200 × 600 × 50 | 0.72 m² | ~4.3 kg | Residential living rooms, bedrooms |
| Property | Value / Standard |
|---|---|
| Core Material | High-density polyurethane (PU) foam |
| Surface Finish | Stone-textured, matte to semi-matte |
| Fire Resistance | Class B1 fire-retardant |
| Moisture Resistance | Closed-cell structure; no water absorption |
| Temperature Range | -20 °C to +80 °C |
| Colour Stability | UV-resistant pigment coating; no significant fade under standard interior/shaded exterior use |
| Toxicity | Non-toxic, no VOC off-gassing after cure |
| Installation Method | Construction adhesive and/or mechanical fixing |
| Recyclability | Recyclable PU; eco-friendly production |
Panels weigh up to 90% less than natural stone, eliminating structural reinforcement requirements and reducing labour costs significantly.
Closed-cell PU foam prevents water ingress, making these panels suitable for bathrooms, kitchens, and covered outdoor areas.
Meets Class B1 fire-retardant standards, providing a critical safety margin for commercial and residential applications.
No quarrying, no harmful chemical off-gassing once cured, and fully recyclable at end of life.
Precision moulds replicate natural grain, shadow lines, and mineral variation for an authentic stone appearance.
Standard construction adhesive is sufficient; panels can be cut with a utility knife or jigsaw — no wet saw required.
One of the most compelling advantages of the Decorative Stone Effect PU Panel In Stone is how straightforward installation is compared to real stone. Below is the recommended process from Bingochic's technical team.
| Step | Action | Technical Notes |
|---|---|---|
| 1 | Surface preparation | Wall must be clean, dry, and structurally sound. Remove loose paint, dust, or grease. Plaster or drywall is ideal substrate. |
| 2 | Dry-fit layout planning | Lay panels on the floor first. Work from the centre outward or from a corner, depending on the design. |
| 3 | Cut to size | Use a utility knife, handsaw, or jigsaw. PU cuts cleanly without generating harmful silica dust (unlike real stone). |
| 4 | Apply adhesive | Apply polyurethane-based construction adhesive in a serpentine bead pattern across the back face. Do not use solvent-based adhesives. |
| 5 | Fix panel to wall | Press firmly and hold for 30–60 seconds. Use temporary support pins or masking tape on larger panels while adhesive sets (typically 2–4 hours). |
| 6 | Optional mechanical fixing | For panels in high-traffic or exterior areas, supplement with stainless-steel screws countersunk into the panel and sealed with matching filler. |
| 7 | Joint finishing | Fill hairline gaps with colour-matched acrylic caulk or flexible sealant. Avoid rigid grout which may crack under thermal movement. |
| 8 | Final clean | Wipe surface with a soft damp cloth. Avoid abrasive pads or solvent cleaners. |
The versatility of PU stone panels means they appear across a wide spectrum of design projects. Bingochic provides dedicated room-by-room solutions to help designers select the right product for each environment.
In residential settings, PU stone panels are most commonly installed as feature walls in living rooms and bedrooms. A textured stone wall behind a television unit or bed headboard creates a focal point that anchors the room without requiring structural engineering. Bathroom and kitchen installations benefit from the panel's inherent moisture resistance.
Hotels, restaurants, and retail stores routinely specify PU stone panels for high-traffic areas where real stone would be prohibitively heavy or expensive. The panels arrive pre-finished, cutting project timelines dramatically. A hotel lobby that once required four weeks of wet stone laying can be clad in PU panels in three to four days.
Under eaves, on balcony soffits, or as garden-wall features protected from direct rain, H-Series panels perform reliably across the temperature range of -20 °C to +80 °C. Their UV-stabilised coating resists bleaching in diffuse daylight conditions.
Trade-show designers prize PU stone panels because they install quickly, weigh little enough to ship economically, and can be demounted and reinstalled without damage — a genuine circular-economy advantage.
| Criterion | PU Stone Panel (H-Series) | Natural Stone Tile |
|---|---|---|
| Weight (per m²) | ~6 kg | 25–80 kg |
| Structural requirement | Standard drywall or plaster | Often requires reinforced substrate |
| Installation time (10 m²) | ~4 hours (1 person) | 2–3 days (specialist team) |
| Specialist tools required | No (utility knife sufficient) | Yes (wet saw, grinder, mixer) |
| Moisture resistance | Excellent (closed-cell PU) | Variable; requires sealing |
| Cracking risk | Very low (flexible material) | Moderate to high (rigid, brittle) |
| Fire rating | Class B1 | Non-combustible (A1) |
| Maintenance | Damp cloth; no sealing required | Periodic sealing; grout cleaning |
| Relative material cost | Low–Medium | Medium–Very High |
| Eco-impact | Low (no quarrying, recyclable) | High (quarrying, heavy transport) |
The H-Series sits within Bingochic's extensive PU Stone range, which spans eleven series to meet every design brief — from narrow coursed-brick profiles to large rusticated-block formats. Browse all series below:
Beyond PU Stone, Bingochic also manufactures PVC Panels, SPC Flooring, Integrated Wall Panels, and 3D PVC Wall Panels — a complete interior-finish ecosystem from a single supplier.
PU stone panels are engineered for minimal upkeep, but a simple maintenance routine will preserve their appearance for decades.
| Frequency | Task | Recommended Method |
|---|---|---|
| Weekly | Dust removal | Soft dry cloth or feather duster; light vacuum with brush head |
| Monthly | Surface wipe-down | Damp cloth with mild neutral detergent (pH 6–8). Rinse with clean water. |
| Annually | Joint inspection | Check flexible sealant in joints; re-apply if cracked or shrunk. |
| As needed | Stain removal | Spot-clean with isopropyl alcohol on a soft cloth. Avoid bleach or acetone. |
| Avoid | Abrasive scrubbing | Steel wool, abrasive pads, or high-pressure steam cleaning can damage the textured surface. |
Bingochic is headquartered at No. 8 Feng Road, Shuangfeng Village, Yuanhua Town, Haining City, Zhejiang Province, China — a region renowned for its concentration of advanced polymer and construction-materials manufacturing. The company operates a modern factory equipped with precision moulding lines and quality-control laboratories that ensure every panel shipped meets its stated technical specifications.
The company's export operations span Europe, North America, the Middle East, and Australia. Technical support and sampling are available through the contact team, and the FAQ section answers the most common pre-purchase questions about product suitability, lead times, and custom colour options.
For the latest product launches and project case studies, visit the Media hub, which features both company news and curated industry news relevant to the decorative panel market.
The Decorative Stone Effect PU Panel In Stone — H-Series represents the ideal intersection of aesthetics, engineering, and practicality. Whether the goal is a dramatic hotel lobby, a cosy residential feature wall, or a high-traffic commercial facade, PU stone panels deliver the visual authority of natural stone with none of the structural compromises.
With Class B1 fire retardancy, closed-cell moisture resistance, a temperature tolerance of -20 °C to +80 °C, and a weight of roughly 6 kg/m², they outperform natural stone in every practical category while matching it aesthetically. Backed by Bingochic's manufacturing expertise and global supply chain, the H-Series is a reliable specification choice for projects of any scale.
Phone: +86-400-0573-073
Email: alice.yin@bingochic.com
Address: No. 8 Feng Road, Shuangfeng Village, Yuanhua Town, Haining City, Zhejiang Province, China
Request a Sample or Quote
